bauma CHINA 2026 runs 24-27 November 2026 at SNIEC (Shanghai New International Expo Center) in Shanghai, with a second venue open 23-26 November under the same ticket. Guangzhou Shenyue Machinery Technology Co., Ltd. is at Booth E4.187 in Hall E4 at SNIEC for all four days, running seven free stand-up sessions at the parts table: four ten-minute talks and three thirty-minute classes covering engine overhaul kits, turbochargers, new arrivals, turbo diagnostics, electrics and filters, and fuel and oil pumps. All are free, require no booking and come with English materials. The practical plan is to pick the two or three sessions that match your fleet, send your part-number list before 24 November, and use the stand time to confirm stock, grade, lead time and a written English quotation. Show dates and the session schedule are published by the organizer, so confirm final arrangements on the official bauma CHINA website.
The seven sessions at Booth E4.187, 24-27 November 2026
| Date and time | Session and the question it answers |
|---|---|
| Nov 24, Tue, 10:30 - 10 min | Engine overhaul kits, matching the four right. Mitsubishi piston, liner, rings and pin as one matched set. |
| Nov 24, Tue, 14:00 - 30 min | Overhaul Kit Class. Hino J05 / J08 bore grades, ring gaps and oversize logic; how to avoid a second teardown. |
| Nov 25, Wed, 10:30 - 10 min | Turbochargers, getting the model right. Reading the Garrett nameplate and the J05 / J08 substitution rules. |
| Nov 25, Wed, 14:00 - 30 min | New Arrivals: the Shenyue 2026 line-up and slow-moving numbers now quotable from the shelf. |
| Nov 26, Thu, 11:00 - 30 min | Turbo Diagnostics: where oil leaks start, and how to tell a turbo fault from an engine fault. |
| Nov 26, Thu, 15:00 - 10 min | Electrics and filters, buying the right one. Sensors, solenoids, displays, panels and filter cross-references. Note the 15:00 start. |
| Nov 27, Fri, 10:30 - 10 min | Injection pumps, injectors and oil pumps, matched by part number against the machine serial. |
How to confirm it
- Fix the venues and dates before booking travel
SNIEC runs 24-27 November 2026 and the second Shanghai venue runs 23-26 November 2026. They are separate sites, not two halls of one building, and one ticket covers both. Booth E4.187 is at SNIEC, Hall E4, so a visit on 23 November will not reach this stand.
- Choose sessions by the machines you maintain
The two 24 November sessions are not repeats: the morning talk covers Mitsubishi four-piece kits and the afternoon class covers Hino J05 / J08. If your fleet is mostly Hino-powered, the 14:00 class is the one to protect in your diary. If you buy turbochargers, the 25 November nameplate talk and the 26 November diagnostics clinic pair well.
- Mark the one session that breaks the pattern
Six of the seven sessions start at 10:30 or 14:00. The electrics and filters talk on 26 November starts at 15:00 because the morning is taken by the thirty-minute turbo diagnostics clinic. Writing 10:30 next to that one is the easiest way to miss it.
- Turn your part numbers into a list before you fly
Put the machine model and serial number against every line, add a photo of the old part or its nameplate where the number is unclear, and state the grade you want quoted. A casting number and a part number are different identifiers, and a serial break can change which one fits a given build.
- Plan the stand visit as a quotation, not a browse
Stock availability, price by grade, lead time and a written English quotation can all be settled at E4.187. Tell the team which two or three numbers you want to see on the table so they are ready when you arrive, and leave time after the session for the parts comparison rather than rushing to the next hall.
- Keep a fallback for the days you cannot attend
If your visit falls on a day with no session you need, the stand is still open all four days for part-number look-ups and quotations. Send the list before the show and ask for the written answer to be ready; the session handouts can be collected or sent afterwards.
What to do about it
Start with the two or three part numbers that cause the most downtime, not the longest list. A short, resolved list produces a usable quotation; a long, unresolved one produces follow-up questions.
Ask for the grade on every line. Genuine, OEM and clearly identified aftermarket are different products at different prices, and a quotation without grades cannot be compared fairly with another offer.
Bring a photo of the worn part and its mating face. Wear pattern, flange shape and connector type often settle a fitment question that a number alone cannot, especially on sensors and solenoid valves.
If a number cannot be confirmed from the nameplate or the catalog, expect it to be marked commonly quoted and checked against the serial break. That is slower than a guess and much cheaper than shipping the wrong part.
Guangzhou Shenyue Machinery Technology Co., Ltd. is an independent supplier of excavator parts, with formal authorized distribution for Mitsubishi Heavy Industries, Garrett (since 2017), TONGMYUNG, Marusan and NIKURA. It is not an authorized dealer, subsidiary or affiliate of Kobelco Construction Machinery Co., Ltd.; Kobelco parts are supplied through original channels with the grade stated on every quotation line.
If you are not traveling to Shanghai, send the list anyway. A written quotation issued before 24 November gives you a benchmark for anything offered during show week and keeps the follow-up in writing.
Need the parts this covers?
Send the machine model, serial number and the part numbers you need. We confirm fitment before payment and state the grade of every line — genuine, OEM-quality or aftermarket.
Request a quoteFrequently asked
Do the seven sessions at Booth E4.187 require registration?
No. All seven are free, need no booking, and run as short stand-up talks at the parts table in front of the booth with English handouts. The stand is compact, so listeners gather in the aisle rather than inside; that is the intended format, not an error in the organizer's listing.
Which venue is Booth E4.187 in?
SNIEC, Hall E4. bauma CHINA 2026 runs across two Shanghai venues under one ticket: the second venue is open 23-26 November and SNIEC is open 24-27 November. Our stand is at SNIEC for all four days, so a 23 November visit will not reach it.
Are the two engine overhaul-kit sessions the same content?
No. The 10:30 ten-minute talk on 24 November covers Mitsubishi four-piece kits; the 14:00 thirty-minute class covers Hino J05 / J08 bore grades, ring gaps and oversize logic. They were deliberately split by engine family, and the morning presenter will point J08 questions to the afternoon class.
What should I send before the show?
The machine model and serial number, part numbers or a clear photo of the nameplate, photos of the worn part, and the grade you want quoted. Guangzhou Shenyue Machinery Technology Co., Ltd. can then check stock, confirm the grade and have a written English quotation ready at the stand.